Pcb Jobs
Browse 130 exciting jobs hiring in Pcb now. Check out companies hiring such as Anduril Industries, SpaceX, Beta Technologies in Stockton, Louisville/Jefferson County, Tempe.
Anduril is hiring a Senior Supplier Development Engineer (PCB/PCBA) to qualify and industrialize suppliers, optimize PCB/PCBA production, and ensure supply readiness for mission-critical defense systems.
SpaceX is hiring a Senior Electrical Engineer for Starship avionics to lead development and qualification of high-reliability spacecraft electronics.
BETA Technologies is hiring a Motor Controls Software Engineer to develop and validate advanced motor control algorithms for electric aircraft propulsion systems.
Lead electrical test and validation for palm-sized silicon photonics LiDAR modules, owning test infrastructure from prototype characterization to production bring-up.
Shield AI is hiring a seasoned Hardware Recruiter to lead full-cycle talent acquisition for electrical and mechanical engineering teams supporting next-generation autonomous aircraft and systems.
Voyager Technologies seeks a Manufacturing Engineer to lead PCBA manufacturing, reflow soldering, DFMA, and process-improvement efforts for mission-critical defense and space systems in San Diego.
Anduril is hiring a Supplier Industrialization Engineer (PCB/PCBA) to lead supplier qualification, production readiness, and process optimization for PCB assemblies across the product lifecycle.
Lead sourcing and procurement for PCB and electronic hardware for SpaceX’s Starshield satellite program, driving supplier selection, cost reduction, and production ramp readiness.
WindBorne Systems is hiring a Supply Chain Lead to establish robust inventory, procurement, and international logistics systems that will support scaling manufacturing and global operations.
Design and validate next-generation satellite power electronics as a Power Electronics Engineer II on CesiumAstro's growing space systems team.
Lead PCB sourcing and supplier strategy for Starlink in Redmond, driving cost, capacity, and quality initiatives to support satellite development and mass production.
CesiumAstro is hiring a Principal Power Electronics Engineer I to lead design and integration of advanced power electronics for high-reliability satellite platforms.
Boeing BT&E-El Segundo is hiring an Associate or Mid-Level Electrical Design & Analysis Engineer to design, test, and sustain special test equipment and electronic hardware for satellite test systems.
Contribute to life‑saving automated flight systems as an Electrical System Integration Engineering Intern, owning projects from design to flight test at Reliable Robotics in Mountain View.
Relativity Space seeks an Avionics Mechanical Design Engineer II in Long Beach to design, analyze, and validate mechanical avionics hardware for the Terran R vehicle.
Relativity Space is hiring a Senior Avionics Mechanical Design Engineer to lead mechanical design, analysis, and validation of avionics hardware for the Terran R vehicle.
Relativity Space is hiring a Senior Mixed-Signal Hardware Engineer to lead design, bring-up, and qualification of mixed-signal avionics for the Terran R launch vehicle.
Design, verify, and qualify compact, flight‑worthy instrumentation and test systems for BETA Technologies' electric aircraft as an Electrical Design and Verification Engineer on the AMS team.
Motorola Solutions' Access Control division is hiring a Hardware Test Engineer in Culver City to design and execute hardware test plans and improve product quality across high-volume access control systems.
Senior Software Engineer (Hardware Test) to build Python-driven test frameworks, drivers, and scalable test infrastructure that validate aircraft components and increase hardware reliability.
Contribute to aerospace hardware validation as an entry-level Software Engineer writing Python drivers, automated test frameworks, and CI/CD for scalable test stands at Shield AI.
Lead the electrical design and lifecycle of Starlink satellite hardware, delivering high-performance, flight-ready avionics or payload electronics from concept through production.
Lead the Product Validation Engineering team to design and deliver hardware validation software, test frameworks, and system-level tools for Flock Safety's mission-critical devices.
CesiumAstro is hiring an RF Engineer II to design and deliver board-level RF hardware and contribute to phased-array satellite communications systems.
Lead development of robust electrical hardware for Seneca's autonomous aerial suppression drones, driving designs from concept through deployment.
Atom Computing is hiring a Senior Mechanical Engineer in Boulder to design and validate precision opto-mechanical systems and lead hands-on assembly for next-generation quantum computers.
Smiths Interconnect is hiring a U.S. citizen Process Engineer in Salisbury to drive manufacturing process improvements, ensure product quality, and support mission-critical electronic and mechanical assembly operations.
Work at GDMS as a Summer 2026 Electrical Engineering Intern to support design, testing, and troubleshooting of defense-focused electronic systems while gaining hands-on experience with seasoned engineering teams.
SpaceX seeks a detail-oriented PCB Chemical Lab Technician to perform wet-chemistry analyses, reliability testing, and lab support to drive Starlink PCB manufacturing yield and quality in Bastrop, TX.
Shield AI is hiring a hands-on Hardware Test Engineering Co-op in the Dallas area to build and maintain electrical test fixtures, PCBAs, and test-stand integrations for aerospace hardware.
Senior Embedded Engineer to develop C/C++ firmware, perform hardware bring-up, and build sensor and avionics interfaces for Shield AI’s autonomous UAV platforms.
Relativity Space is hiring an Avionics Hardware Engineer I to design and validate PCB-level avionics for the Terran R launch vehicle and drive hardware from concept to flight readiness.
Etched is hiring a Manufacturing Electrical Engineer in San Jose to lead board-level NPI, DFM, and yield optimization for its transformer-optimized AI ASIC systems.
Experienced manufacturing engineer needed to perform failure analysis, improve manufacturing yields, and lead cross-functional reliability improvements for electromechanical surgical systems at a market-leading medical device company.
WindBorne Systems is hiring a Sensor Development Engineer in Palo Alto to design, prototype, and validate novel environmental sensors for a global smart weather balloon constellation.
Apex is seeking an Avionics Engineer to design, integrate, and validate avionics and electrical systems for satellite platforms while working closely with cross-functional teams to deliver flight-ready hardware.
Experienced power electronics control engineer wanted to develop and implement motor and power-control firmware for an experimental electric airship at an innovative aerospace start-up in Sunnyvale.
Support multidisciplinary biomedical research by designing and building embedded and RF prototypes, developing firmware, and validating sensor-based systems in a university lab environment.
Lead INFICON’s Syracuse electrical engineering team to deliver precision analog and sensor electronics, drive Agile development, and ensure long-term product reliability.
CesiumAstro is hiring a Senior FPGA Engineer II to design and verify high-speed FPGA networking systems for satellite and aerospace applications.
Senior Electrical Engineer to lead BMS and mixed-signal PCB design, integration, and testing for autonomous vehicle sensor and power systems at a defense technology company.
Micron Technology is hiring an Embedded Software Engineer in Boise to develop firmware and interface software for custom semiconductor test equipment and support production validation.
Experienced electronics engineer needed to develop and transfer precision scientific-instrument electronics from concept through manufacturing at Thorlabs in Columbia, SC.
Be an Avionics Intern at Mach Industries supporting PCB design, wire harness development, prototyping, and testing for autonomous defense platforms during a 12-week onsite summer program in Huntington Beach, CA.
Work on cutting-edge electric aircraft as a Test Engineer responsible for test design, data analysis, automation, and troubleshooting of avionics and electronic systems.
Zydro Marine Technologies is hiring a hands-on Electrical Engineer to lead embedded hardware design, PCB development, and field validation for modular USV autonomy systems.
Teledyne Technologies seeks an experienced Process Engineering Manager to lead process development, continuous improvement, and NPI efforts for high-reliability electronics manufacturing in Lewisburg, TN.
CACI seeks an Embedded Systems Technician in San Antonio to develop and integrate TPS and automated aviation test equipment for military aviation customers.
Lead the design and development of high-performance analog electronics and AFE systems for Veolia's water analytical instruments, driving projects from schematic through production.
NVIDIA is hiring a Signal & Power Integrity Engineer to drive SI/PI modeling, simulation, lab correlation and guideline creation for high-speed GPU systems and interfaces.
How much do pcb jobs pay?
Below 50k*
2
|
50k-100k*
22
|
Over 100k*
67
|
Top companies hiring for pcb jobs
- Shield AI 10
- SpaceX 9
- Anduril Industries 5
- Beta Technologies 4
- Relativity Space 3
- CesiumAstro 2
- Boeing 2
Best cities to find pcb jobs
- San Francisco 6
- Redmond 5
- Long Beach 3
- Los Angeles 3
- Hawthorne 2
