Let’s get started
By clicking ‘Next’, I agree to the Terms of Service
and Privacy Policy, and consent to receive emails from Rise
Jobs / Job page
GNC Engineer image - Rise Careers
Job details

GNC Engineer

Long Wall Company was created in 2025 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us.


What we look for

Mission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission.


Total Ownership. We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success.


As a GNC Engineer, you will help design and implement robust control solutions for both endo- and exo-atmospheric flight systems. You’ll work closely with a cross-functional team of mechanical, fluid, and electrical engineers to develop innovative deployable launch platforms that support Long Wall’s rapid deployment goals.

This role offers the opportunity to contribute across the full development lifecycle—from modeling and simulation to integration and flight testing. Your work will directly impact every mission and flight, playing a critical part in shaping the future of responsive missile defense systems.


Responsibilities
  • Develop GNC algorithms, models and software
  • Develop, analyze and review data to validate and verify system meets specifications and design requirements
  • Perform modeling and simulation tasks to validate system design and performance
  • Perform GNC system integration, checkout and troubleshooting of anomalies
  • Perform and direct test planning, development of test procedures and test execution
  • Develop sensor and support Avionics systems requirements
  • Support critical sensor (e.g. IMU) system engineering, integration and test
  • Support critical controller (e.g. Thrust Vector Control Actuators, Throttle Valves) system engineering, integration and test
  • Mission specific analysis for customer launch and in support of business development
  • Perform "Hardware in the Loop" (HITL) testing/simulation prior to launch on both testbed and integrated launch vehicle


Basic Qualifications
  • B.S. degree from an accredited university
  • 2+ years of experience in the development of aircraft, missile, spacecraft or similar vehicle GNC system


Preferred Skills and Experience
  • M.S. degree from an accredited university
  • Skills in modeling, simulation, and analysis software such as MATLAB/Simulink and experience in at least one or more high-level programming languages (e.g. C, C++, or FORTRAN)
  • Experience developing terminal engagement algorithms
  • Experience with hypersonic flight regime control systems
  • Proficiency in trajectory planning/design and optimization algorithms or tools (e.g. POST2)
  • Day of launch or on-orbit systems support including launch limits and loads/GNC capabilities evaluation
  • Demonstrated ability to solve complex and difficult technical problems with simple robust solutions


Additional Requirements:
  • Ability to sit or stand for extended periods of time
  • Ability to use a computer to complete assignments
  • Ability to communicate with individuals and groups in person, by phone and telepresence
  • Ability to pick up to 50lbs
  • While performing the duties of this job, the employee will typically work in an office environment
  • Ability to travel up to 25% of the time


$100,000 - $165,000 a year
This is the lowest to highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs.
 
In addition to base pay and equity, we offer:
·       Heavily employer-subsidized medical, dental, and vision insurance plans
·       Long Wall paid life insurance and LTD coverage
·       4% 401k match
·       Student loan repayment assistance program
·       Paid parental leave
·       Family planning assistance program
·       Long Wall paid financial wellness program
·       Paid time off for non-exempt employees and flexible vacation policy for exempt employees

ITAR Requirement

This position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations.  As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position.

 

Equal Opportunity Employer

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Average salary estimate

$132500 / YEARLY (est.)
min
max
$100000K
$165000K

If an employer mentions a salary or salary range on their job, we display it as an "Employer Estimate". If a job has no salary data, Rise displays an estimate if available.

Similar Jobs
SEAKR Engineering Hybrid 6221 S Racine Cir, Englewood, CO 80111, USA
Posted 60 minutes ago

Experienced FPGA Engineer needed to lead development and verification of complex FPGA designs for space electronics at SEAKR Engineering.

Photo of the Rise User
Posted 12 hours ago

Experienced Transportation Engineer needed to lead multimodal transportation projects, mentor staff, and grow client relationships for Fehr & Peers' Orlando office.

Photo of the Rise User
AECOM Hybrid Philadelphia, PA, USA
Posted 16 hours ago

AECOM is hiring a Structural Lead Engineer in Philadelphia to lead structural design and provide technical mentorship on water and wastewater infrastructure projects.

Photo of the Rise User

Rigetti is hiring a Senior Quantum Engineer to lead automation and high-performance simulation of quantum integrated circuit designs for large-scale superconducting processors.

Photo of the Rise User

Lead Milhouse’s Aviation division as Vice President, driving technical delivery, business development, and team performance across major airport design and construction programs.

Photo of the Rise User
Posted 17 hours ago

Lead high-profile tunneling projects in the Los Angeles region as a Principal Tunnel Engineer/Project Manager, providing technical direction, client engagement, and team leadership for AECOM's Tunnel Practice.

Photo of the Rise User
Anduril Industries Hybrid Costa Mesa, California, United States
Posted 20 hours ago

Design and integrate high-performance mechanical hardware for advanced unmanned air vehicles, guiding projects from concept and prototyping to flight test and production at Anduril.

Photo of the Rise User
NBCUniversal Hybrid 35 Corporate Drive, Monroe, Connecticut
Posted 17 hours ago

NBC Sports is hiring a Manager of Broadcast Design Engineering to design and deliver IP-based production, studio, and remote broadcast systems that support high-profile live sports programming from Monroe, CT.

Photo of the Rise User
Posted 8 hours ago

ABCO Subsea is recruiting Mechanical Engineering students for a hands-on Engineering Design Internship in Houston focused on CAD-driven subsea equipment design and manufacturing documentation.

Photo of the Rise User

Be part of a hands-on engineering team at H3X Technologies as a Mechanical Design Engineer Intern, owning part designs, analyses, prototypes, and test validation for next-generation electric motors.

Photo of the Rise User
Mission Driven
Social Impact Driven
Passion for Exploration
Reward & Recognition

SpaceX is hiring a hands-on Robotics Specialist to support Starlink PCB manufacturing by troubleshooting, building, and programming PLC/HMI/SCADA controls to maximize uptime and reliability.

Photo of the Rise User

Experienced survey technician needed to lead field survey crews and provide GPS, drone, and stakeout services for NCDOT District II construction projects.

Photo of the Rise User
Anduril Industries Hybrid Costa Mesa, California, United States; Irvine, California, United States
Posted 20 hours ago

Anduril is hiring a floor-oriented Manufacturing AIT Engineer to lead system-level assembly, integration, and test for Sentry autonomous tower systems, ensuring mechanical, electrical, and thermal interfaces perform reliably from prototype to production.

MATCH
Calculating your matching score...
FUNDING
DEPARTMENTS
SENIORITY LEVEL REQUIREMENT
TEAM SIZE
No info
HQ LOCATION
No info
EMPLOYMENT TYPE
Full-time, onsite
DATE POSTED
November 9, 2025
Risa star 🔮 Hi, I'm Risa! Your AI
Career Copilot
Want to see a list of jobs tailored to
you, just ask me below!