Northrop Grumman Aeronautics Systems is seeking several experienced Principal or Senior Principal Electronics Engineers (Payloads Field Service) to support our Avionics Integration team in Jacksonville, FL. Current Top Secret clearance required.
This position reports to the Operations team lead within the Mission Systems Integrated Product Team (MS IPT). This position will receive daily tasking and prioritization from their site lead. The selected candidate will be responsible for operations and maintenance support of the MQ-4C Triton sensors and communications systems at a Main Operating Base (MOB).
The selected candidates will undergo training (lasting approximately six (6) months) at multiple US locations such as Rancho Bernardo, CA, Jacksonville, FL, and/or Baltimore, MD with a final assignment location in Jacksonville, FL.
Initially, this position will work a 9/80 shift. As the program matures, the shifts will become 12-hour shifts that could include nights, weekends, and/or holidays.
The selected candidate will be required to work full-time, on-site at our facility. There is no remote work available for this role. Outside of traveling for initial training, this position requires the ability to travel up to 10% of the time.
Duties and responsibilities may include, but are not limited to:
Representing the organization as the on-site engineer for communications, networks, and payload subsystems
Applying system knowledge to communicate complex technical issues to local site leadership, the Degrader Action Cell (DAC), Forward Operation Bases (FOBs), and Responsible Engineers (REs)
Under direction of the DAC as system Technical Authority, reviewing and analyzing engineering schematics, NGC and supplier design data, and functional test artifacts to troubleshoot system issues
Acting as liaison for internal Northrop Grumman engineering teams to ensure repeated success, providing redlines to procedures when necessary
Providing real time support to flight operations and addressing any issues related to communications and/or payloads to include MFAS Radar, EO/IR, airborne recorder, and link16 to include fault isolation, remediation, and resolution.
Following priorities set by local site leadership, perform system performance evaluations and assist with trend analysis as needed for Responsible Engineers (REs)
Interact with local site leadership and Active Duty/Government customers on technical matters often requiring coordination between organizations
Coordinating work with site leadership and confirming that Maintenance Action Forms (MAFs) are in place for all required work
Perform nominal recovery procedures and provide immediate feedback to Government Mission Payload Operators (MPOs) during sorties
Assist Government Air Vehicle Operators (AVOs) with Main Operating Base comms (voice), networks, and other AVO interfaces
Capture relevant information from shift in logs, perform hotwash after sorties, and deliver pass-down to ongoing support team
Attain and employ expertise across all supported sensor and communications systems
This position can be filled as either a Principal (level 3) or Senior Principal (level 4), depending upon the qualifications below.
Basic Qualifications:
Principal: Bachelor’s Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 5 years of related engineering experience; OR a Master’s degree in a STEM discipline and 3 years of related engineering experience; OR a Ph.D. in a STEM discipline and 1 year of related engineering experience
Sr Principal: Bachelor’s Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 8 years of related engineering experience; OR a Master’s degree in a STEM discipline and 6 years of related engineering experience; OR a Ph.D. in a STEM discipline with 4 years of related engineering experience
Must have an active DoD Top Secret clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation)
Must have the ability to obtain and maintain SCI access
Must have the ability to obtain a CI Polygraph
Must have the ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs.
Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs.
Competence in Linux, troubleshooting, engineering documents, tools and equipment
Familiarity with payloads operations or comms/networking operations
Preferred Qualifications:
Active DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, CISSP
Demonstrated understanding of MQ-4C sensors and communications payloads
CCNA / CCNP Certification
Experience with test equipment: network analyzers, spectrum analyzers, signal generators
MPO/TC operator system knowledge
System Administrator experience
Operations and Maintenance experience at a field site
If an employer mentions a salary or salary range on their job, we display it as an "Employer Estimate". If a job has no salary data, Rise displays an estimate if available.
AECOM seeks an experienced Engineering Geologist to deliver geotechnical and geological expertise for transportation infrastructure projects across NJ and NY.
Manufacturing Engineer needed at Copeland's Sidney plant to drive automation, lean improvements, tooling design and production support for HVACR manufacturing.
Support and execute high-explosive experiments at LLNL by operating firing tanks and associated systems while ensuring safety, documentation, and diagnostic support.
Haleon is hiring an Operational Excellence Engineering Intern to support continuous improvement projects, digital OEE data collection, and HAPS system usage at its St. Louis manufacturing site.
The NYC DEP is hiring a permanent Assistant Electrical Engineer to produce design and construction documents and support electrical and control systems across water and wastewater infrastructure in Queens.
Experienced Civil EIT needed in Phoenix to deliver traffic and transportation projects, support project management, mentor staff, and contribute to business development at Kimley-Horn.
Experienced licensed engineer needed to design and draft fire sprinkler systems remotely using AutoSPRINK, Revit, and AutoCAD.
Lead the design and delivery of digital instrumentation and control systems for nuclear projects, applying deep I&C engineering expertise to new-build, modernization, and FOAK initiatives at Sargent & Lundy.
Lead the design and implementation of HW/SW HIL validation frameworks to accelerate safe, repeatable validation of battery management and power electronics controllers at Redwood Materials.
Coffman Engineers is hiring an entry-level Electrical Engineer in Honolulu to support electrical design and consulting for commercial, institutional, and government projects.
AECOM is seeking an experienced Waterfront Structural Engineer in Jacksonville, FL to lead structural design and project management for marine and coastal infrastructure.
A technically strong, client-focused Lead Implementation Engineer is needed to drive enterprise implementations, troubleshoot integrations, and mentor the implementation team in a fully remote US role.
Lead Intuitive's supplier engineering function for plastics manufacturing to drive quality, capacity scaling, and supply-chain resilience for robotic surgical systems.